This record describes multibeam echosounder data collected on RV Investigator voyage IN2022_T01, titled "Transit: Cairns to Darwin 2022." The voyage took place between September 11, 2022 and September 17, 2022 (AEST), departing from Cairns and returning to Darwin. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information and watercolumn backscatter between Cairns and Darwin. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. During this voyage, the frequency range was set to 70 to 100 kHz. Data are stored in *.all raw format for bathymetry and backscatter and *.wcd format for watercolumn backscatter at CSIRO. There are 155 *.all files totaling 94.8 GB of raw bathymetry/backscatter data and 129 *.wcd files totaling 399 GB of watercolumn data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. GPS tide was computed using the EGM2008 model and applied to the processed data. Predicted tides were applied to the first 10 lines of the dataset due to lack of accurate GPS heighting available. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes gravity data collected on RV Investigator voyage IN2022_T01, titled "Transit: Cairns to Darwin 2022." The voyage took place between September 11, 2022 and September 17, 2022 (AEST), departing from Cairns and returning to Darwin. The gravity meter instrument is a MicroG Lacoste Air-Sea II. Data are stored in .ENV and .DAT data files at CSIRO. There are 9 files totalling 102 MB of raw data in this dataset. A wharf tie was undertaken at Fort Hill Wharf in Darwin upon vessel arrival using a Scintrex Autograv CG-5. Wharf tie data can be found in in2022_t01_gravity_wharf_tie_FtHillWharfWEST_Darwin_17092022.TXT, which is stored with the raw data. No processing has been conducted on this data. Additional information regarding this dataset is contained in the GSM data acquisition and processing report.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2022_T01, titled "Transit: Cairns to Darwin 2022." The voyage took place between September 11, 2022 and September 17, 2022 (AEST), departing from Cairns and returning to Darwin. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter between Cairns and Darwin. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in *.all raw format for bathymetry and backscatter and *.wcd format for watercolumn backscatter at CSIRO. There are 73 *.all files totaling 4.45 GB of raw bathymetry/backscatter data and 73 *.wcd files totaling 7.2 GB of watercolumn data in this dataset Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. GPS tide was computed using the EGM2008 model and applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes sub bottom profiler data collected on RV Investigator voyage IN2022_T01, titled "Transit: Cairns to Darwin 2022." The voyage took place between September 11, 2022 and September 17, 2022 (AEST), departing from Cairns and returning to Darwin. The Kongsberg SBP120 (sub bottom profiler) was used to acquire data containing the specular reflections at different sediment interfaces below the seafloor. The SBP120 provides a 3° by 3° angular resolution. The echosounder's frequency sweep range is from 2.5 to 7 kHz. The SBP120 was logged continuously for the extent of the voyage. Data are stored in *.raw (702 files 16.6 GB) raw and *.seg (695 files 16.4 GB) segy formats at CSIRO. The segy format data had a real time processing stream applied, which applies gain, a gain correction, and matched filter with replica shaping. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes scientific split-beam echosounder data collected on the RV Investigator voyage IN2022_T01, titled "Transit: Cairns to Darwin 2022." The voyage took place between September 11, 2022 and September 17, 2022 (AEST), departing from Cairns and returning to Darwin. The Simrad EK60 split beam echosounders for 18 kHz and Simrad EK80 split beam echosounders for 38, 70 120, 200 and 333 kHz were used to acquire acoustic backscatter data to a range of 250 m (shallow water) or 1500 m (deep water) between Cairns and Darwin. All frequencies were logged continuously for the extent of the voyage. The 70 and 120 kHz frequencies were set to passive for the periods of the voyage due to interference with the EM710. Data are stored in *.raw, *.bot and *.idx format at CSIRO. There are 496 files totalling 26.3 GB of raw data in this dataset. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes Hydrology (HYD) data collected from the Marine National Facility (MNF) RV Investigator voyage IN2022_T01, titled: "Transit: Cairns to Darwin 2022". The voyage took place between 11 to 17 September 2022, departing from Cairns and returning to Darwin Hydrology samples were collected from Niskin bottles sampled at various depths during Conductivity-Temperature-Depth (CTD) deployments. Parameters analysed were salinity, dissolved oxygen, phosphate, silicate, nitrate plus nitrite and ammonium. This dataset has been processed (quality-controlled), and archived at the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre (IDC) in Hobart. Additional information regarding this dataset is contained in the Voyage Report and Data Processing Report.

This record describes the Underway (UWY) data collected from the Marine National Facility (MNF) RV Investigator voyage IN2022_T01, titled: "Transit: Cairns to Darwin 2022". The voyage took place between 11 to 17 September 2022, departing from Cairns and returning to Darwin. Standard Underway data is continuously recorded, consisting of: (1) Navigation data (NAV): Latitude, Longitude, Speed, Heading, Course Over Ground, Gyros, and Doppler Log (dual GPS instrument). (2) Thermosalinograph (TSG): Water Salinity, Flow-Rate, Temperature, Fluorescence, pCO2 and Optode/Oxygen. (3) Atmospheric (MET): Humidity, Wind Speed and Direction (vane and ultrasonic), Radiometer/Sea Surface Temperature, Pyranometer/Solar Radiation, Photosynthetically Active Radiation (PAR), Air Temperature, Air Pressure, Rain, Ozone and Trace Gases (port and starboard instruments). The quality-controlled RV Investigator underway meteorological and SST data are supplied to the IMOS AODN and other global data repositories and distributors, and made available for satellite SST validation by the Australian Bureau of Meteorology (BoM). Near real-time, unprocessed data are available via the link "Visualisation tool for Underway Data." This dataset has been processed (quality-controlled), and archived by the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre (IDC). Data are available at time intervals of 5 sec (NetCDF format), 5 sec, 10 sec, 1 min and 5 min (ASCII format). Note: not all variables are quality controlled; please check for existing QC flags in the datasets. Additional information regarding this dataset is contained in the Voyage Summary and/or the Data Processing Reports for this voyage.

This record describes the Conductivity-Temperature-Depth (CTD) data collected from the Marine National Facility RV Investigator voyage IN2022_T01, titled: "Transit: Cairns to Darwin 2022". The voyage took place between 11 and 17 September 2022, departing from Cairns and returning to Darwin. . Data for 1 CTD deployment were acquired using the Sea-Bird SBE911 CTD unit #22 (S/N 1039), fitted with 36 twelve-litre bottles on the rosette sampler. Sea-Bird-supplied calibration factors were used to compute the pressures and preliminary conductivity values. CSIRO-supplied calibrations were applied to the temperature data. The data were subjected to automated QC to remove spikes and out-of-range values. During the deployment, the Niskin bottles labelled #18 & #19 were in swapped positions on the rosette. The bottle in position #19 was not fired at the planned depth (which was the chlorophyll maximum), but it was fired at the next depth stop. This was accounted for in the hydrology data and did not impact processing or data quality. The final conductivity calibration from the secondary sensor had a standard deviation (SD) of 0.0024157 PSU, outside our target of ‘less than 0.002 PSU’. The standard product of 1-decibar binned averages were produced using data from the secondary sensors. The dissolved oxygen data calibration fit had a SD of 0.85269 μM. The agreement between the CTD and bottle data was good. An ECO Triplet was also installed on the auxiliary A/D channels of the CTD, and its data were logged in Seasave with calibration values applied. The only processing applied by CapPro was NaN filtering, and the resulting ECO Triplet data are present in the average file. To access the full voyage plan and other reports and data associated with this voyage, please see the contact information at the end of this report.

This record describes the End of Voyage (EOV) data archive from the Marine National Facility (MNF) RV Investigator voyage IN2022_T01, titled "Transit: Cairns to Darwin 2022." The voyage took place between September 11, 2022 and September 17, 2022 (AEST), departing from Cairns and returning to Darwin. For further information please refer to the voyage documentation links. Instruments used and data collected include: Regular measurements: Lowered ADCP (LADCP), Acoustic Doppler Current Profiler (ADCP; 75, 150 KHz ), Greenhouse Gas Analysers (Picarro), Cloud Condensation Nuclei counter (CCN), Condensation Particle Counters (CPC), Disdrometer, Radon sensor, Scanning Mobility Particle Sizers (SMPS), CTD, Hydrochemistry, Fisheries Echosounder (EK80), Multibeam Echosounder (EM710, EM122), Sub-bottom Profiler (SBP120), GPS Positioning System, Doppler Velocity Log, Thermosalinographs (TSG), Fluorometer, Oxygen Optode, pCO2, Gravimeter, Multiangle Absorption Photometer (MAAP), Nephelometer, Atmospheric Temperature, Humidity, Pressure, Wind and Rain sensors, Photosynthetically Active Radiation (PAR) sensor, Precision Infrared Radiometer (PIR), Precision Spectral Pyranometer (PSP), Starboard and Portside Radiometers, Air Sampler. Voyage-specific measurements: Biogeochemical (BGC) Argo floats. The archive for the IN2022_T01 EOV raw data is curated by the CSIRO National Collections and Marine Infrastructure (NCMI) Information and Data Centre (IDC) in Hobart, with a permanent archive at the CSIRO Data Access Portal (https://data.csiro.au/), providing access to voyage participants and processors of the data collected on the voyage. All voyage documentation is available electronically to MNF support via the local network. Applications to access voyage documentation by non-CSIRO participants can be made via NCMI_DataLibrarians@csiro.au.